Taiwan, solid capacitor / chip capacitor
Conductive Polymer Aluminum Solid Capacitors(Radial Lead Type)
Conductive Polymer Aluminum Solid Capacitors(Surface Mount Type)
Conductive Polymer Aluminum Electrolytic Capacitors(Stacking Type)
Conductive Polymer Hybrid Aluminum Electrolytic Capacitors
| Category Temperature Range | -55〜+ 125℃ | Rated Voltage Range | 25to80Vdc | |||||||
| Rated Capacitance Range | 22to470（μF） | Capacitance Tolerance | ±20％（M） | |||||||
Surge Voltage |
Rated voltage X 1.15 | Dissipation Factor (at 20°C 120Hz) | Rated Voltage (V) | 25 | 35 | 50 | 63 | 80 | ||
| tan δ(max) | 0.14 | 0.12 | 0.1 | 0.08 | 0.08 | |||||
| Leakage Current | Shall not exceed values shown in standard ratings (at 20°C after 2 mins.) | |||||||||
|
Endurance |
125°C, 4000 hours, apply the rated ripple current without exceeding the rated voltage | |||||||||
| Appearance | No significant damage | |||||||||
| Capacitance Change | ≦ ±30% of the initial value | |||||||||
| DF(tanδ) | ≦ 200% of the initial specified value | |||||||||
| ESR | ≦ 200% of the initial specified value | |||||||||
| Leakage current | ≦ The initial specified value | |||||||||
|
Damp Heat (Steady State) |
60°C, 90% RH, 1000 hours, rated voltage applied | |||||||||
| Appearance | No significant damage | |||||||||
| Capacitance Change | ≦ ±20% of the initial value | |||||||||
| DF(tanδ) | ≦ 200% of the initial specified value | |||||||||
| ESR | ≦ 200% of the initial specified value | |||||||||
| Leakage current | ≦ The initial specified value | |||||||||
Shelf Life |
After storage for 1,000 hours at 125±2°C with no voltage applied and then being stabilized at 20°C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) | |||||||||
| Appearance | No significant damage | |||||||||
| Capacitance Change | ≦ ±30% of the initial value | |||||||||
| DF(tanδ) | ≦ 200% of the initial specified value | |||||||||
| ESR | ≦ 200% of the initial specified value | |||||||||
| Leakage current | ≦ The initial specified value | |||||||||
| Rated voltage(DC)(V) | Capacitance(μF) | Size Code | Leakage Current(μA) | ESR (mΩ) | Rated Ripple Current (mA)(rms) | Part No. |
| 25(28.8) | 100 | 0608 | 25 | 30 | 1,400 | 250AVMC101M0608Inquiry |
| 220 | 0810 | 55 | 27 | 1,600 | 250AVMC221M0810Inquiry | |
| 270 | 0810 | 67.5 | 27 | 1,600 | 250AVMC271M0810Inquiry | |
| 330 | 1010 | 82.5 | 20 | 2,000 | 250AVMC331M1010Inquiry | |
| 470 | 1010 | 117.5 | 20 | 2,800 | 250AVMC471M1010Inquiry | |
| 35(40.3) | 68 | 0608 | 23.8 | 35 | 1,400 | 350AVMC680M0608Inquiry |
| 150 | 0810 | 52.5 | 27 | 1,600 | 350AVMC151M0810Inquiry | |
| 180 | 0810 | 63 | 27 | 1,600 | 350AVMC181M0810Inquiry | |
| 270 | 1010 | 94.5 | 20 | 2,000 | 350AVMC271M1010Inquiry | |
| 330 | 1010 | 115.5 | 20 | 2,000 | 350AVMC331M1010Inquiry | |
| 330 | 1012 | 115.5 | 17 | 2,300 | 350AVMC331M1012Inquiry | |
| 50 (57.5) | 33 | 0608 | 16.5 | 40 | 1,100 | 500AVMC330M0608Inquiry |
| 68 | 0810 | 34 | 30 | 1,250 | 500AVMC680M0810Inquiry | |
| 100 | 1010 | 50 | 28 | 1,600 | 500AVMC101M1010Inquiry | |
| 120 | 1010 | 60 | 28 | 1,600 | 500AVMC121M1010Inquiry | |
| 180 | 1012 | 90 | 25 | 2,000 | 500AVMC181M1012Inquiry | |
| 63 (72.5) | 22 | 0608 | 13.9 | 80 | 900 | 630AVMC220M0608Inquiry |
| 33 | 0810 | 20.8 | 40 | 1,100 | 630AVMC330M0810Inquiry | |
| 56 | 1010 | 35.3 | 30 | 1,400 | 630AVMC560M1010Inquiry | |
| 68 | 1010 | 42.8 | 30 | 1,400 | 630AVMC680M1010Inquiry | |
| 82 | 1010 | 51.7 | 30 | 1,400 | 630AVMC820M1010Inquiry | |
| 80 (92) | 27 | 0810 | 21.6 | 45 | 1,050 | 800AVMC270M0810Inquiry |
| 47 | 1010 | 37.6 | 36 | 1,360 | 800AVMC470M1010Inquiry |
| Category Temperature Range | -55〜+ 105℃ | Rated Voltage Range | 16 to 80Vdc | |||||||
| Rated Capacitance Range | 22 to 470（μF） | Capacitance Tolerance | ±20％（M） | |||||||
Surge Voltage |
Rated voltage X 1.15 | Dissipation Factor (at 20°C 120Hz) | Rated Voltage (V) | 25 | 35 | 50 | 63 | 80 | ||
| tan δ(max) | 0.14 | 0.12 | 0.1 | 0.08 | 0.08 | |||||
| Leakage Current | Shall not exceed values shown in standard ratings (at 20°C after 2 mins.) | |||||||||
Endurance |
105°C, 10000 hours, apply the rated ripple current without exceeding the rated voltage | |||||||||
| Appearance | No significant damage | |||||||||
| Capacitance Change | ≦ ±30% of the initial value | |||||||||
| DF(tanδ) | ≦ 200% of the initial specified value | |||||||||
| ESR | ≦ 200% of the initial specified value | |||||||||
| Leakage current | ≦ The initial specified value | |||||||||
Damp Heat (Steady State) |
60°C, 90% RH, 1000 hours, rated voltage applied | |||||||||
| Appearance | No significant damage | |||||||||
| Capacitance Change | ≦ ±20% of the initial value | |||||||||
| DF(tanδ) | ≦ 200% of the initial specified value | |||||||||
| ESR | ≦ 200% of the initial specified value | |||||||||
| Leakage current | ≦ The initial specified value | |||||||||
Shelf Life |
After storage for 1,000 hours at 105±2°C with no voltage applied and then being stabilized at 20°C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) | |||||||||
| Appearance | No significant damage | |||||||||
| Capacitance Change | ≦ ±30% of the initial value | |||||||||
| DF(tanδ) | ≦ 200% of the initial specified value | |||||||||
| ESR | ≦ 200% of the initial specified value | |||||||||
| Leakage current | ≦ The initial specified value | |||||||||
| Rated voltage (DC)(V) | Capacitance (μF) | Size Code | Leakage Current (μA) | ESR (mΩ) | Rated Ripple Current (mA)(rms) | Part No. |
| 16 (18.4) | 470 | 0810 | 75 | 26 | 2,400 | 160AVMA471M0810Inquiry |
| 25 (28.8) | 100 | 0608 | 25 | 30 | 2,000 | 250AVMA101M0608Inquiry |
| 220 | 0810 | 55 | 27 | 2,300 | 250AVMA221M0810Inquiry | |
| 330 | 1010 | 82.5 | 20 | 2,500 | 250AVMA331M1010Inquiry | |
| 390 | 1010 | 97.5 | 20 | 2,500 | 250AVMA391M1010Inquiry | |
| 470 | 1010 | 117.5 | 20 | 2,500 | 250AVMA471M1010Inquiry | |
| 35 (40.3) | 68 | 0608 | 23.8 | 35 | 2,000 | 350AVMA680M0608Inquiry |
| 100 | 0810 | 35 | 30 | 1,800 | 350AVMA101M0810Inquiry | |
| 150 | 0810 | 52.5 | 27 | 2,300 | 350AVMA151M0810Inquiry | |
| 270 | 1010 | 94.5 | 20 | 2,500 | 350AVMA271M1010Inquiry | |
| 330 | 1010 | 115.5 | 20 | 2,500 | 350AVMA331M1010Inquiry | |
| 50 (57.5) | 33 | 0608 | 16.5 | 40 | 1,600 | 500AVMA330M0608Inquiry |
| 68 | 0810 | 34 | 30 | 1,800 | 500AVMA680M0810Inquiry | |
| 100 | 1010 | 50 | 28 | 2,000 | 500AVMA101M1010Inquiry | |
| 120 | 1010 | 60 | 28 | 2,000 | 500AVMA121M1010Inquiry | |
| 150 | 1012 | 75 | 25 | 2,000 | 500AVMA151M1012Inquiry | |
| 180 | 1012 | 90 | 25 | 2,000 | 500AVMA181M1012Inquiry | |
| 63 (72.5) | 22 | 0608 | 13.9 | 80 | 1,500 | 630AVMA220M0608Inquiry |
| 33 | 0810 | 20.8 | 40 | 1,700 | 630AVMA330M0810Inquiry | |
| 47 | 0810 | 29.6 | 40 | 1,700 | 630AVMA470M0810Inquiry | |
| 56 | 1010 | 35.3 | 30 | 1,800 | 630AVMA560M1010Inquiry | |
| 68 | 1010 | 42.8 | 30 | 1,800 | 630AVMA680M1010Inquiry | |
| 82 | 1010 | 51.7 | 30 | 1,800 | 630AVMA820M1010Inquiry | |
| 100 | 1010 | 63 | 30 | 2,400 | 630AVMA101M1010Inquiry | |
| 80 (92) | 22 | 0810 | 17.6 | 45 | 1,550 | 800AVMA220M0810Inquiry |
| 47 | 1010 | 37.6 | 36 | 1,700 | 800AVMA470M1010Inquiry |
| Category Temperature Range | -55 to+125℃ | Rated Voltage Range | 2.5 to 80Vdc |
| Rateh Capacitance Range | 22 to 470 (μF) | Capacitance Tolerance | ±20% (M) |
| Surge Voltage | Rated voltage X 1.15 (at 125°C) | Dissipation Factor(at 20°C 120 Hz) |
Rated Voltage(V)2535506380tan0.140.120.10.080.08 |
| Leakage Current | Shall not exceed values shown in standard ratings. (at 20°C after 2 mins.) | ||
| Enhurance | 125℃, 4000hrs,apply the rated ripple current without exceeding the rated voltage | ||
| Appearance | No significant damage | ||
| Capacitance Change | ≦ ±30% of the initial value | ||
| DF(tanδ) | ≦ 200% of the initial specified value | ||
| ESR | ≦ 200% of the initial specified value | ||
| Leakage current | ≦ The initial specified value | ||
| hamp Heat (Steady State) | 85℃, 85 to 90% RH, 1000hrs, voltage applied | ||
| Appearance | No significant damage | ||
| Capacitance Change | ≦ ±20% of the initial value | ||
| DF(tanδ) | ≦ 200% of the initial specified value | ||
| ESR | ≦ 200% of the initial specified value | ||
| Leakage current | ≦ The initial specified value | ||
| Surge Voltage | 1,000 cycles and each one includes charge with surge voltage specified at 125°C for 0.5min through a protective resistor (R=1kΩ) and discharge for 5.5min. | ||
| Appearance | No significant damage | ||
| Capacitance Change | ≦ ±20% of the initial value | ||
| DF(tanδ) | ≦ 150% of the initial specified value | ||
| ESR | ≦ 150% of the initial specified value | ||
| Leakage current | ≦ The initial specified value | ||
| Rated voltage (DC)(V) | Capacitance (μF) | Size Code | Leakage Current (μA) | ESR (mΩ) | Rated Ripple Current (mA)(rms) | Part No. |
25 (31.3) |
100 | 0608 | 25 | 30 | 1400 | 250AVQC101M0608Inquiry |
| 150 | 0608 | 37.5 | 30 | 1800 | 250AVQC151M0608Inquiry | |
| 220 | 0810 | 55 | 27 | 2900 | 250AVQC221M0810Inquiry | |
| 270 | 0810 | 67.5 | 27 | 2900 | 250AVQC271M0810Inquiry | |
| 330 | 1010 | 82.5 | 20 | 3500 | 250AVQC331M1010Inquiry | |
| 470 | 1010 | 117.5 | 20 | 3500 | 250AVQC471M1010Inquiry | |
| 35 (43.8) | 47 | 0606 | 16.5 | 60 | 900 | 350AVQC470M0606Inquiry |
| 68 | 0608 | 23.8 | 35 | 1400 | 350AVQC680M0608Inquiry | |
| 100 | 0810 | 35 | 30 | 1900 | 350AVQC101M0810Inquiry | |
| 150 | 0810 | 52.5 | 27 | 2900 | 350AVQC151M0810Inquiry | |
| 180 | 0810 | 63 | 27 | 2900 | 350AVQC181M0810Inquiry | |
| 220 | 1010 | 77 | 20 | 2800 | 350AVQC221M1010Inquiry | |
| 270 | 1010 | 94.5 | 20 | 3500 | 350AVQC271M1010Inquiry | |
| 330 | 1010 | 115.5 | 20 | 3500 | 350AVQC331M1010Inquiry | |
| 330 | 1012 | 115.5 | 14 | 3500 | 350AVQC331M1012Inquiry | |
| 50 (62.5) | 33 | 0608 | 16.5 | 40 | 1100 | 500AVQC330M0608Inquiry |
| 68 | 0810 | 34 | 30 | 2700 | 500AVQC680M0810Inquiry | |
| 120 | 1010 | 60 | 25 | 2900 | 500AVQC121M1010Inquiry | |
| 180 | 1012 | 90 | 17 | 3200 | 500AVQC181M1012Inquiry | |
| 63 (78.8) | 22 | 0608 | 13.9 | 80 | 900 | 630AVQC220M0608Inquiry |
| 47 | 0810 | 29.6 | 32 | 2400 | 630AVQC470M0810Inquiry | |
| 56 | 1010 | 35.3 | 30 | 2800 | 630AVQC560M1010Inquiry | |
| 82 | 1010 | 51.7 | 30 | 2800 | 630AVQC820M1010Inquiry | |
| 100 | 1010 | 63 | 30 | 2800 | 630AVQC101M1010Inquiry | |
| 80 (100) | 22 | 0810 | 17.6 | 45 | 1050 | 800AVQC220M0810Inquiry |
| 47 | 1010 | 37.6 | 33 | 1360 | 800AVQC470M1010Inquiry | |
| 56 | 1010 | 44.8 | 33 | 1360 | 800AVQC560M1010Inquiry |
| Item | Conditions | Characteristics | |
| Category Temperature Range | -55 to +125 ℃ | ||
| Rated Voltage Range | 2 to 25Vdc | ||
| Capacitance Tolerance | at 20℃, 120Hz | ±20 % (M)；Y：+10 ~ -35%；K：±10 % | |
| Leakage Current | at 20℃ after 2 minutes | I ≦ 0.1CV (2V.DC to 2.5V.DC) I ≦ 0.3CV (16V.DC to 25V.DC) I：Leakage Current(μA) C：Rated Capacitance(μF), V：Rated Voltage(V) |
|
| Surge Voltage | 15 to +35℃ | Rated voltage × 1.25 (2 V.DC to 16 V.DC) Rated voltage × 1.15 (20 V.DC to 25 V.DC) |
|
| Dissipation Factor (tanδ) | at 20℃，120Hz | ≦0.1 | |
| Endurance | 125℃, rated voltage applied, 1000 hrs. | Appearance | No significant damage |
| Capacitance Change | ±20% of the initial value | ||
| Dissipation Factor | ≤ 200% of the initial specified value | ||
| Leakage Current | within the initial specified value | ||
| Damp Heat, Steady State | 60℃, 90 to 95%RH, 500 hrs | Appearance | No significant damage |
| Capacitance Change | (2V.DC to 2.5V.DC)+70%, -20% of the initial value (16V.DC to 25V.DC) +60%, -20% of the initial value |
||
| Dissipation Factor | ≤ 200% of the initial specified value | ||
| Leakage Current | 2 V.DC to 2.5 V.DC within the initial specified value 10 V.DC to 25 V.DC 300% of the initial specified value |
||
| Surge Voltage | The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages, 125% rated voltage, at 15~35℃ for 30 seconds through a protective resistor(R=1KΩ)and discharge for 5min 30 seconds. | Appearance | No significant damage |
| Capacitance Change | ±10% of the initial value | ||
| Dissipation Factor | within the initial specified value | ||
| Leakage Current | within the initial specified value | ||
| Solderability | Pb-free solder Around 25% rosin melted ethanol or isopropylalcohol Temperature：245 ± 5 ℃ Immersing time：2 ± 0.5 s | More than 95% of outer terminal surface to be covered | |
| Resistance to Solvents | Solvent：isopropylalcohol Immersing time：30 ± 5 s Room temperature | No significant damage and marking readable | |
| Rated voltage (DC)(V) | Capacitance (μF) | tanδ Max. @120Hz | Leakage Current (μA) | ESR (mΩ) | Rated Ripple Current (A)(r.m.s) | Part No. | |
| 105℃ | 125℃ | ||||||
| 2 | 1.6 | 330 | 0.1 | 66.0 | 9 | 6.3 | ACTH2R0S331E09Inquiry |
| 330 | 0.1 | 66.0 | 9 | 6.3 | ACTH2R0S331E09YInquiry | ||
| 330 | 0.1 | 66.0 | 6 | 7.5 | ACTH2R0S331E06Inquiry | ||
| 2.5 | 2 | 330 | 0.1 | 82.5 | 9 | 6.3 | ACTH2R5S331E09Inquiry |
| 330 | 0.1 | 82.5 | 9 | 6.3 | ACTH2R5S331E09YInquiry | ||
| 330 | 0.1 | 82.5 | 6 | 7.5 | ACTH2R5S331E06Inquiry | ||
| 330 | 0.1 | 82.5 | 4.5 | 8.5 | ACTH2R5S331E04Inquiry | ||
| 16 | 16 | 47 | 0.1 | 225.6 | 40 | 3.2 | ACTH160S470E40Inquiry |
| 56 | 0.1 | 268.8 | 40 | 3.2 | ACTH160S560E40Inquiry | ||
| 25 | 25 | 15 | 0.1 | 112.5 | 40 | 3.2 | ACTH250S150E40Inquiry |
| 33 | 0.1 | 247.5 | 40 | 3.2 | ACTH250S330E40Inquiry | ||
| TemperatureCompensation Multipliers for Ripple Current | ||||
| Temperature | T≦45℃ | 45℃ ＜T≦ 85℃ | 85℃＜T≦105℃ | 125℃＜T |
| 2 V.DC to 2.5 V.DC | 1.0 | 0.7 | 0.25 | 0.25 |
| 16 V.DC to 25 V.DC | 1.0 | 0.8 | 0.5 | 0.25 |
| ACTH | 2R0 | S | 471 | E06 | |
Product |
Rated voltage
2R0: 2.0V |
Case Height S:1.9mm |
Capacitance
471 : 470µF |
ESR
E06：6mΩ E04：4.5mΩ |
Suffix for special code Y：Capacitance +10 ~ -35% K：Capacitance ±10% Blank space: Capacitance ±20 % |
| Item | Conditions | Characteristics | |
| Category Temperature Range | -55 to +105 ℃ | ||
| Rated Voltage Range | 2 to 25Vdc | ||
| Capacitance Tolerance | at 20℃,120Hz | ±20 % (M)；Y：+10~ -35% | |
| Leakage Current | at 20℃after 2 minutes | I ≦ 0.1CV (2 V.DC to 6.3 V.DC) I ≦0.3CV ( 25 V.DC) I：LeakageCurrent(μA), C：Rated Capacitance(μF), V：RatedVoltage(V) | |
| Surge Voltage | 15 to +35℃ | Rated voltage × 1.25 (2 V.DC to 6.3 V.DC) Rated voltage × 1.15 (25 V.DC) | |
| Dissipation Factor (tanδ) | at 20℃，120Hz | 0.06 max. | |
| Endurance | 105℃,rated voltage applied, 2000 hrs. | Appearance | No significant damage |
| Capacitance Change | ±20%of the initial value | ||
| Dissipation Factor | £200% ofthe initial specifiedvalue | ||
| Leakage Current | 2V.DC to 6.3 V.DC £300% of the initial specified value 25 V.DC £within the initial limit | ||
| Damp Heat, Steady State | 60℃,90 to 95%RH, 500 hrs. | Appearance | No significant damage |
| Capacitance Change | (2 V.DC to 2.5 V.DC)+70%, -20% of the initial value (6.3V.DC) +50%, -20% of the initial value (25 V.DC) +60%, -20% of the initial value |
||
| Dissipation Factor | £200% of the initial specified value | ||
| Leakage Current | 2V.DC to 6.3 V.DC withinthe initial specified value 25 V.DC £ 300% of the initial specified value | ||
| Surge Voltage | The capacitors shal be subjected to 1000 cycles each consisting of charge with the surgevoltages, at 15℃to35℃for 30 seconds through a protective resistor (R=1KΩ)and discharge for 5min 30 seconds. | Appearance | No significant damage |
| Capacitance Change | ±10% of the initial value | ||
| Dissipation Factor | within the initialspecified value | ||
| Leakage Current | within the initial specified value | ||
| Rated voltage (DC)(V) | Capacitance (μF) | tanδ Max. @120Hz |
Leakage Current (μA) | ESR (mΩ) | Rated Ripple Current (mA)(rms) | Part No. |
| 2 | 220 | 0.06 | 44 | 9 | 6,300 | ACAS2R0S221E09Inquiry |
| 220 | 0.06 | 44 | 9 | 6,300 | ACAS2R0S221E09YInquiry | |
| 330 | 0.06 | 66 | 9 | 6,300 | ACAS2R0S331E09Inquiry | |
| 330 | 0.06 | 66 | 9 | 6,300 | ACAS2R0S331E09YInquiry | |
| 330 | 0.06 | 66 | 6 | 7,500 | ACAS2R0S331E06Inquiry | |
| 2.5 | 220 | 0.06 | 55 | 9 | 6,300 | ACAS2R5S221E09Inquiry |
| 220 | 0.06 | 55 | 9 | 6,300 | ACAS2R5S221E09YInquiry | |
| 330 | 0.06 | 82.5 | 9 | 6,300 | ACAS2R5S331E09Inquiry | |
| 330 | 0.06 | 82.5 | 9 | 6,300 | ACAS2R5S331E09YInquiry | |
| 330 | 0.06 | 82.5 | 6 | 7,500 | ACAS2R5S331E06Inquiry | |
| 6.3 | 100 | 0.06 | 63 | 15 | 2,700 | ACAS6R3S101E15Inquiry |
| 150 | 0.06 | 94.5 | 15 | 5,100 | ACAS6R3S151E15YInquiry | |
| 25 | 15 | 0.06 | 112.5 | 40 | 3,200 | ACAS250S150E40Inquiry |
| 22 | 0.06 | 165.0 | 40 | 3,200 | ACAS250S220E40Inquiry |
| TemperatureCompensation Multipliers for Ripple Current | |||
| ≦45°C | 45°C< T ≦85°C | 85°C< T ≦105°C | |
| 2V.DC to 2.5V.DC | 1.0 | 0.7 | 0.25 |
| 6.3V.DC to 25V.DC | 1.0 | 0.8 | 0.5 |
| ACAS | 2R5 | S | 471 | E04 | |
| Product Series | Rated Voltage 2R5: 2.5V.DC | Case Height S:1.9mm | Capacitance 471 : 470µF | ESR E04：4mΩ | Suffix for special code Y=+10~-35% |
| Item | Conditions | Characteristics | |
| Category Temperature Range | -55 to +105 ℃ | ||
| Rated Voltage Range | 2 to 25 Vdc | ||
| Capacitance Tolerance | at 20℃, 120Hz | ±20 % (M)；Y：+10 ~ -35% | |
| Leakage Current | at 20℃ after 2 minutes | I ≦ 0.1CV (2 V.DC to 6.3 V.DC) I ≦ 0.3CV (10 V.DC to 25 V.DC) I：Leakage Current(μA), C：Rated Capacitance(μF), V：Rated Voltage(V) | |
| Surge Voltage | 15 to +35℃ | Rated voltage × 1.25 (2 V.DC to 16 V.DC) Rated voltage × 1.15 (20 V.DC to 25 V.DC) | |
| Dissipation Factor (tanδ) | at 20℃，120Hz | 0.06 max. | |
| Endurance | 105℃, rated voltage applied, 2000 hrs. | Appearance | No significant damage |
| Capacitance Change | ±20% of the initial value | ||
| Dissipation Factor | ≤ 200% of the initial specified value | ||
| Leakage Current | 2 V.DC to 6.3 V.DC ≤ 300% of the initial specified value 10 V.DC to 25 V.DC ≤ within the initial limit | ||
| Damp Heat, Steady State | 60℃, 90 to 95%RH, 500 hrs. | Appearance | No significant damage |
| Capacitance Change | (2 V.DC to 2.5 V.DC) +70%, -20% of the initial value (10 V.DC to 25 V.DC) +60%, -20% of the initial value | ||
| Dissipation Factor | ≤ 200% of the initial specified value | ||
| Leakage Current | 2 V.DC to 6.3 V.DC within the initial specified value 10 V.DC to 25 V.DC ≤ 300% of the initial specified value | ||
| Surge Voltage | The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages, at 15℃ to 35℃ for 30 seconds through a protective resistor(R=1KΩ) and discharge for 5min 30 seconds. | Appearance | No significant damage |
| Capacitance Change | ±10% of the initial value | ||
| Dissipation Factor | within the initial specified value | ||
| Leakage Current | within the initial specified value | ||
| Rated voltage (DC)(V) | Capacitance (μF) | tanδ Max. @120Hz |
Leakage Current (μA) | ESR (mΩ) | Rated Ripple Current (mA)(rms) | Part No. |
| 2 | 470 | 0.06 | 94 | 9 | 6,300 | ACAH2R0S471E09Inquiry |
| 470 | 0.06 | 94 | 9 | 6,300 | ACAH2R0S471E09YInquiry | |
| 470 | 0.06 | 94 | 6 | 7,500 | ACAH2R0S471E06Inquiry | |
| 470 | 0.06 | 94 | 4.5 | 8,500 | ACAH2R0S471E04Inquiry | |
| 470 | 0.06 | 94 | 3.0 | 10,200 | ACAH2R0S471E03Inquiry | |
| 560 | 0.06 | 112 | 4.5 | 8,500 | ACAH2R0S561E04Inquiry | |
| 2.5 | 470 | 0.06 | 117.5 | 9 | 6,300 | ACAH2R5S471E09Inquiry |
| 470 | 0.06 | 117.5 | 9 | 6,300 | ACAH2R5S471E09YInquiry | |
| 470 | 0.06 | 117.5 | 6 | 7,500 | ACAH2R5S471E06Inquiry | |
| 470 | 0.06 | 117.5 | 4.5 | 8,500 | ACAH2R5S471E04Inquiry | |
| 470 | 0.06 | 117.5 | 3.0 | 10,200 | ACAH2R5S471E03Inquiry | |
| 560 | 0.06 | 140 | 4.5 | 8,500 | ACAH2R5S561E04Inquiry | |
| 10 | 100 | 0.06 | 300 | 40 | 3,200 | ACAH100S101E40Inquiry |
| 100 | 0.06 | 300 | 40 | 3,200 | ACAH100S101E40YInquiry | |
| 16 | 47 | 0.06 | 225.6 | 40 | 3,200 | ACAH160S470E40Inquiry |
| 56 | 0.06 | 268.8 | 40 | 3,200 | ACAH160S560E40Inquiry | |
| 68 | 0.06 | 326.4 | 40 | 3,200 | ACAH160S680E40Inquiry | |
| 20 | 33 | 0.06 | 198 | 40 | 3,200 | ACAH200S330E40Inquiry |
| 25 | 33 | 0.06 | 237.5 | 40 | 3,200 | ACAH250S330E40Inquiry |
| TemperatureCompensation Multipliers for Ripple Current | |||
| ≦45℃ | 45℃<t≤85℃ | 85℃<t≤105℃ | |
| 2V.DC to 6.3V.DC | 1.0 | 0.7 | 0.25 |
| 10V.DC to 25V.DC | 1.0 | 0.8 | 0.5 |
| ACAH | 2R5 | S | 471 | E04 | |
Product Series |
Rated voltage
2R5: 2.5V.DC |
Case Height S:1.9mm |
Capacitance
471=470μF |
ESR
E04：4.5mΩ |
Suffix for special code Y=+10~-35% |
| Item | Conditions | Characteristics | |
| Category Temperature Range | -55 to +105 ℃ | ||
| Rated Voltage Range | 2 to 2.5Vdc | ||
| Capacitance Tolerance | at 20℃,120Hz | ±20 % (M)；Y：+10~ -35% | |
| Leakage Current | at 20℃after 2 minutes | I ≦ 0.1CV (2 V.DC to 2.5 V.DC) I：LeakageCurrent(μA), C：Rated Capacitance(μF), V：RatedVoltage(V) | |
| Surge Voltage | 15 to 35℃ | Rated voltage × 1.25 (2 V.DC to 2.5 V.DC) | |
| Dissipation Factor (tanδ) | at 20℃，120Hz | Case Height : S Type, 0.06 max. | |
| Endurance | 105℃,rated voltage applied, 2000 hrs. | Appearance | No significant damage |
| Capacitance Change | ±20%of the initial value | ||
| Dissipation Factor | £200% ofthe initial specifiedvalue | ||
| Leakage Current | 2V.DC to 2.5 V.DC £300% of the initial specified value | ||
| Damp Heat, Steady State | 60℃,90 to 95%RH, 500 hrs. | Appearance | No significant damage |
| Capacitance Change | (2 V.DC to 2.5 V.DC)+70%, -20% of the initial value |
||
| Dissipation Factor | £200% of the initial specified value | ||
| Leakage Current | 2V.DC to 2.5 V.DC withinthe initial specified value | ||
| Surge Voltage | The capacitors shal be subjected to 1000 cycles each consisting of charge with the surgevoltages, at 15℃to35℃for 30 seconds through a protective resistor (R=1KΩ)and discharge for 5min 30 seconds. | Appearance | No significant damage |
| Capacitance Change | ±10% of the initial value | ||
| Dissipation Factor | within the initialspecified value | ||
| Leakage Current | within the initial specified value | ||
| Rated voltage (DC)(V) | Capacitance (μF) | tanδ Max. @120Hz |
Leakage Current (μA) | ESR (mΩ) | Rated Ripple Current
(A r.ms) |
Part No. |
|
2 |
220 | 0.06 | 44 | 9 | 6.3 | ACAL2R0S221E09Inquiry |
| 220 | 0.06 | 44 | 9 | 6.3 | ACAL2R0S221E09YInquiry | |
| 330 | 0.06 | 66 | 6 | 7.5 | ACAL2R0S331E06Inquiry | |
| 330 | 0.06 | 66 | 9 | 6.3 | ACAL2R0S331E09Inquiry | |
| 330 | 0.06 | 66 | 9 | 6.3 | ACAL2R0S331E09YInquiry | |
| 470 | 0.06 | 94 | 3 | 10.2 | ACAL2R0S471E03Inquiry | |
| 470 | 0.06 | 94 | 4.5 | 8.5 | ACAL2R0S471E04Inquiry | |
| 470 | 0.06 | 94 | 6 | 7.5 | ACAL2R0S471E06Inquiry | |
| 470 | 0.06 | 94 | 9 | 6.3 | ACAL2R0S471E09Inquiry | |
| 470 | 0.06 | 94 | 9 | 6.3 | ACAL2R0S471E09YInquiry | |
| 2.5 | 220 | 0.06 | 55 | 9 | 6.3 | ACAL2R5S221E09Inquiry |
| 220 | 0.06 | 55 | 9 | 6.3 | ACAL2R5S221E09YInquiry | |
| 330 | 0.06 | 82.5 | 6 | 7.5 | ACAL2R5S331E06Inquiry | |
| 330 | 0.06 | 82.5 | 9 | 6.3 | ACAL2R5S331E09Inquiry | |
| 330 | 0.06 | 82.5 | 9 | 6.3 | ACAL2R5S331E09YInquiry | |
| 470 | 0.06 | 117.5 | 3 | 10.2 | ACAL2R5S470E03Inquiry | |
| 470 | 0.06 | 117.5 | 4.5 | 8.5 | ACAL2R5S470E04Inquiry | |
| 470 | 0.06 | 117.5 | 6 | 7.5 | ACAL2R5S470E06Inquiry | |
| 470 | 0.06 | 117.5 | 9 | 6.3 | ACAL2R5S470E09Inquiry |
| TemperatureCompensation Multipliers for Ripple Current | |||
| ≦45°C | 45°C< T ≦85°C | 85°C< T ≦105°C | |
| 2V.DCto 2.5V.DC | 1.0 | 0.7 | 0.25 |
| ACAL | 2R5 | S | 331 | E06 | |
Product Series |
Rated voltage
2R5: 2.5V |
Case Height S:1.9mm |
Capacitance
331 : 330µF |
ESR
E06：6mΩ |
Suffix for special code Y=+10~-35% |
| Category Temperature Range | -55~+105℃ | Rated Voltage Range | 25 to 80Vdc |
| Rated Capacitance Range | 22 to 470 (μF) | Capacitance Tolerance | ±20% (M) |
| Surge Voltage | Rated voltage X 1.15 (at 105°C) | Dissipation Factor | 0.12 max. (at 20°C 120Hz) |
| Leakage Current | Shall not exceed values shown in standard ratings. (at 20°C after 2 mins.) | ||
| Endurance | 105°C, 5000hrs, rated voltage applied | ||
| Appearance | No significant damage | ||
| Capacitance Change | ≦±20% of the initial value | ||
| DF(tanδ) | ≦150% of the initial specified value | ||
| ESR | ≦150% of the initial specified value | ||
| Leakage current | ≦The initial specified value | ||
| Damp Heat (Steady State) | 60℃, 90 to 95% RH, 1000hrs, voltage applied | ||
| Appearance | No significant damage | ||
| Capacitance Change | ≦±20% of the initial value | ||
| DF(tanδ) | ≦150% of the initial specified value | ||
| ESR | ≦150% of the initial specified value | ||
| Leakage current | ≦The initial specified value | ||
| Surge Voltage | 1,000 cycles and each one includes charge with surge voltage specified at 105°C for 0.5min through a protective resistor (R=1kΩ) and discharge for 5.5min. | ||
| Appearance | No significant damage | ||
| Capacitance Change | ≦±20% of the initial value | ||
| DF(tanδ) | ≦150% of the initial specified value | ||
| ESR | ≦150% of the initial specified value | ||
| Leakage current | ≦The initial specified value | ||
| Rated voltage (DC)(V) | Capacitance (μF) | Size Code | Leakage Current (μA) | ESR (mΩ) | Rated Ripple Current (mA)(rms) | Part No. |
25 (28.8) |
47 | 0606 | 235 | 30 | 2,800 | 250AVHA470M0606Inquiry |
| 56 | 0606 | 280 | 35 | 2,500 | 250AVHA560M0606Inquiry | |
| 100 | 0807 | 500 | 24 | 3,200 | 250AVHA101M0807Inquiry | |
| 180 | 0810 | 900 | 18 | 4,100 | 250AVHA181M0810Inquiry | |
| 220 | 0810 | 1,100 | 18 | 4,100 | 250AVHA221M0810Inquiry | |
| 330 | 0812 | 1,650 | 18 | 4,100 | 250AVHA331M0812Inquiry | |
| 470 | 0812 | 2,350 | 18 | 4,650 | 250AVHA471M0812Inquiry | |
35 (40.3) |
47 | 0606 | 329 | 35 | 2,100 | 350AVHA470M0606Inquiry |
| 68 | 0608 | 476 | 35 | 2,000 | 350AVHA680M0608Inquiry | |
| 100 | 0810 | 700 | 35 | 2,800 | 350AVHA101M0810Inquiry | |
| 150 | 0810 | 1,050 | 25 | 3,000 | 350AVHA151M0810Inquiry | |
| 220 | 0812 | 1,540 | 25 | 2,890 | 350AVHA221M0812Inquiry | |
| 330 | 1012 | 2,310 | 24 | 3,400 | 350AVHA331M1012Inquiry | |
50 (57.5) |
47 | 0810 | 470 | 25 | 2,700 | 500AVHA470M0810Inquiry |
| 68 | 0810 | 680 | 25 | 2,700 | 500AVHA680M0810Inquiry | |
| 120 | 1012 | 1,200 | 19 | 2,950 | 500AVHA121M1012Inquiry | |
| 220 | 1012 | 2,200 | 17 | 2,950 | 500AVHA221M1012Inquiry | |
63 (72.5) |
47 | 0810 | 592 | 25 | 2,700 | 630AVHA470M0810Inquiry |
| 56 | 1012 | 705 | 25 | 2,950 | 630AVHA560M1012Inquiry | |
| 68 | 1012 | 857 | 25 | 3,280 | 630AVHA680M1012Inquiry | |
80 (92) |
22 | 0810 | 352 | 40 | 1,700 | 800AVHA220M0810Inquiry |
| 47 | 1012 | 752 | 33 | 2,100 | 800AVHA470M1012Inquiry | |
| 68 | 1012 | 1,088 | 25 | 2,950 | 800AVHA680M1012Inquiry |
| Category Temperature Range | -55 to 105°C | Rated Voltage Range | 2.5 to 25Vdc |
| Rated Capacitance Range | 22 to 820 (μF) | Capacitance Tolerance | ±20% (M) |
| Surge Voltage | Rated voltage X 1.15 (at 105°C) | Dissipation Factor | 0.12 max. (at 20°C 120Hz) |
| Leakage Current | Shall not exceed values shown in standard ratings. (at 20°C after 2 mins.) | ||
| Endurance | 105°C, 5000hrs, rated voltage applied | ||
| Appearance | No significant damage | ||
| Capacitance Change | ≦ ±20% of the initial value | ||
| DF(tanδ) | ≦ 150% of the initial specified value | ||
| ESR | ≦ 150% of the initial specified value | ||
| Leakage current | ≦ The initial specified value | ||
| Damp Heat (Steady State) | 60°C, 90 to 95% RH, 1000hrs, voltage applied | ||
| Appearance | No significant damage | ||
| Capacitance Change | ≦ ±20% of the initial value | ||
| DF(tanδ) | ≦ 150% of the initial specified value | ||
| ESR | ≦ 150% of the initial specified value | ||
| Leakage current | ≦ The initial specified value | ||
| Surge Voltage | 1,000 cycles and each one includes charge with surge voltage specified at 105°C for 0.5min through a protective resistor (R=1kΩ) and discharge for 5.5min. | ||
| Appearance | No significant damage | ||
| Capacitance Change | ≦ ±20% of the initial value | ||
| DF(tanδ) | ≦ 150% of the initial specified value | ||
| ESR | ≦ 150% of the initial specified value | ||
| Leakage current | ≦ The initial specified value | ||
| Rated voltage (DC)(V) | Capacitance (μF) | Size Code | Leakage Current (μA) | ESR (mΩ) | Rated Ripple Current (mA)(rms) | Part No. |
| 2.5 (2.9) | 330 | 0645 | 700 | 16 | 3,180 | 2R5AV5K331M0645CInquiry |
| 390 | 0606 | 489 | 10 | 3,900 | 2R5AV5K391M0606CInquiry | |
| 560 | 0606 | 700 | 10 | 3,900 | 2R5AV5K561M0606CInquiry | |
| 820 | 0608 | 700 | 7 | 5,000 | 2R5AV5K821M0608CInquiry | |
| 820 | 0610 | 700 | 10 | 4,300 | 2R5AV5K821M0610CInquiry | |
| 6.3 (7.2) | 220 | 0645 | 700 | 17 | 2,300 | 6R3AV5K221M0645CInquiry |
| 220 | 0606 | 277 | 15 | 3,160 | 6R3AV5K221M0606CInquiry | |
| 330 | 0606 | 416 | 17 | 3,390 | 6R3AV5K331M0606CInquiry | |
| 560 | 0608 | 705 | 8 | 5,000 | 6R3AV5K561M0608CInquiry | |
| 560 | 0610 | 705 | 10 | 4,300 | 6R3AV5K561M0610CInquiry | |
| 16 (18.4) | 100 | 0506 | 320 | 26 | 3,000 | 160AV5K101M0506CInquiry |
| 100 | 0606 | 320 | 24 | 2,490 | 160AV5K101M0606CInquiry | |
| 180 | 0606 | 576 | 21 | 3,300 | 160AV5K181M0606CInquiry | |
| 270 | 0610 | 864 | 16 | 3,500 | 160AV5K271M0610CInquiry | |
| 270 | 0807 | 864 | 22 | 3,300 | 160AV5K271M0807CInquiry | |
| 270 | 0810 | 864 | 16 | 4,400 | 160AV5K271M0810CInquiry | |
| 470 | 0810 | 1,504 | 12 | 4,700 | 160AV5K471M0810CInquiry | |
| 560 | 0812 | 1,792 | 14 | 4,950 | 160AV5K561M0812CInquiry | |
| 1,000 | 1012 | 3,200 | 12 | 5,400 | 160AV5K102M1012CInquiry | |
25 (28.8) |
22 | 0645 | 275 | 45 | 2,350 | 250AV5K220M0645CInquiry |
| 27 | 0606 | 338 | 40 | 2,100 | 250AV5K270M0606CInquiry |
| Category Temperature Range | -55~+105℃ | Rated Voltage Range | 2.5 to 25Vdc |
| Rated Capacitance Range | 22 to 1000 (μF) | Capacitance Tolerance | ±20% (M) |
| Surge Voltage | Rated voltage X 1.15 (at 105°C) | Dissipation Factor | 0.12 max. (at 20°C 120Hz) |
| Leakage Current | Shall not exceed values shown in standard ratings. (at 20°C after 2 mins.) | ||
| Endurance | 105°C, 2000hrs, rated voltage applied | ||
| Appearance | No significant damage | ||
| Capacitance Change | ≦±20% of the initial value | ||
| DF(tanδ) | ≦150% of the initial specified value | ||
| ESR | ≦150% of the initial specified value | ||
| Leakage current | ≦The initial specified value | ||
| Damp Heat (Steady State) | 60℃, 90 to 95% RH, 1000hrs, voltage applied | ||
| Appearance | No significant damage | ||
| Capacitance Change | ≦±20% of the initial value | ||
| DF(tanδ) | ≦150% of the initial specified value | ||
| ESR | ≦150% of the initial specified value | ||
| Leakage current | ≦The initial specified value | ||
| Surge Voltage | 1,000 cycles and each one includes charge with surge voltage specified at 105°C for 0.5min through a protective resistor (R=1kΩ) and discharge for 5.5min. | ||
| Appearance | No significant damage | ||
| Capacitance Change | ≦±20% of the initial value | ||
| DF(tanδ) | ≦150% of the initial specified value | ||
| ESR | ≦150% of the initial specified value | ||
| Leakage current | ≦The initial specified value | ||
| Rated voltage (DC)(V) | Capacitance (μF) | Size Code | Leakage Current (μA) | ESR (mΩ) | Rated Ripple Current (mA)(rms) | Part No. |
| 2.5 (2.9) | 330 | 0645 | 700 | 17 | 2,300 | 2R5AVEA331M0645Inquiry |
| 390 | 0506 | 700 | 10 | 3,900 | 2R5AVEA391M0506Inquiry | |
| 390 | 0606 | 292 | 10 | 3,900 | 2R5AVEA391M0606Inquiry | |
| 560 | 0606 | 700 | 10 | 3,900 | 2R5AVEA561M0606Inquiry | |
| 820 | 0610 | 700 | 10 | 4,300 | 2R5AVEA821M0610Inquiry | |
| 6.3 (7.2) | 100 | 0645 | 315 | 19 | 2,300 | 6R3AVEA101M0645Inquiry |
| 220 | 0645 | 700 | 17 | 2,300 | 6R3AVEA221M0645Inquiry | |
| 220 | 0606 | 277 | 15 | 3,160 | 6R3AVEA221M0606Inquiry | |
| 330 | 0606 | 416 | 17 | 3,390 | 6R3AVEA331M0606Inquiry | |
| 560 | 0610 | 705 | 10 | 4,300 | 6R3AVEA561M0610Inquiry | |
| 820 | 0810 | 1,033 | 12 | 4,700 | 6R3AVEA821M0810Inquiry | |
| 1,000 | 0810 | 1,260 | 10 | 5,440 | 6R3AVEA102M0810Inquiry | |
| 16 (18.4) | 47 | 0606 | 376 | 25 | 2,500 | 160AVEA470M0606Inquiry |
| 100 | 0506 | 320 | 27 | 3,000 | 160AVEA101M0506Inquiry | |
| 100 | 0606 | 320 | 24 | 2,490 | 160AVEA101M0606Inquiry | |
| 180 | 0606 | 576 | 22 | 3,300 | 160AVEA181M0606Inquiry | |
| 270 | 0807 | 864 | 22 | 3,300 | 160AVEA271M0807Inquiry | |
| 270 | 0810 | 864 | 16 | 4,400 | 160AVEA271M0810Inquiry | |
| 560 | 0812 | 1,792 | 14 | 4,950 | 160AVEA561M0812Inquiry | |
| 1,000 | 1012 | 3,200 | 12 | 5,400 | 160AVEA102M1012Inquiry | |
| 25 (28.8) | 22 | 0645 | 275 | 45 | 2,350 | 250AVEA220M0645Inquiry |
| 27 | 0606 | 338 | 40 | 2,100 | 250AVEA270M0606Inquiry |
| Category Temperature Range | -55 to 125℃ | Rated Voltage Range | 2.5 to 63Vdc |
| Rateh Capacitance Range | 47 to 1500 (μF) | Capacitance Tolerance | ±20% (M) |
| Surge Voltage | Rated voltage x1.15(at 125°C) | Dissipation Factor | 0.12max.(at 20 °C 120Hz) |
| Leakage Current | Shall not exceed values shown in standard ratings. | ||
| Endurance | 125℃, 1000hrs, rated voltage applied | ||
| Appearance | No significant damage | ||
| Capacitance Change | ≦±20% of the initial value | ||
| DF(tanδ) | ≦150% of the initial specified value | ||
| ESR | ≦150% of the initial specified value | ||
| Leakage current | ≦The initial specified value | ||
| Damp Heat (Steady State) | 60℃, 90 to 95% RH, 1000hrs, voltage applied | ||
| Appearance | No significant damage | ||
| Capacitance Change | ≦±20% of the initial value | ||
| DF(tanδ) | ≦200% of the initial specified value | ||
| ESR | ≦200% of the initial specified value | ||
| Leakage current | ≦The initial specified value | ||
| Surge Voltage | 1,000 cycles and each one includes charge with surge voltage specified at 125 °C for 0.5min through a protective resistor (R=1kΩ) and discharge for 5.5min. | ||
| Appearance | No significant damage | ||
| Capacitance Change | ≦20% of the initial value | ||
| DF(tanδ) | ≦150% of the initial specified value | ||
| ESR | ≦150% of the initial specified value | ||
| Leakage current | ≦The initial specified value | ||
| Rated voltage (DC)(V) | Capacitance (μF) | Size Code | Leakage Current (μA) | ESR (mΩ) | Rated Ripple Current (mArms/ 105℃/100kHz) | Rated Ripple Current (mArms/ 125℃/100kHz) | Part No. |
2.5 (2.9) |
820 |
06X8 | 500 | 7 | 5000 | 2000 | 2R5ARHE821M06X8Inquiry |
| 1200 | 06A0 | 600 | 7 | 5200 | 2080 | 2R5ARHE122M06A0Inquiry | |
4 (4.6) |
560 | 06X8 | 500 | 7 | 5000 | 2000 | 4R0ARHE561M06X8Inquiry |
6.3 (7.2) |
560 | 06X8 | 705 | 10 | 4000 | 1600 | 6R3ARHE561M06X8Inquiry |
16 (18.4) |
100 | 06X8 | 320 | 25 | 2500 | 1000 | 160ARHE101M06X8Inquiry |
| 270 | 06X8 | 864 | 16 | 3200 | 1280 | 160ARHE271M06X8Inquiry | |
| 270 | 08X8 | 864 | 16 | 3800 | 1520 | 160ARHE271M08X8Inquiry | |
| 270 | 08A2 | 864 | 14 | 4500 | 1800 | 160ARHE271M08A2Inquiry | |
| 1000 | 10A2 | 3200 | 12 | 5400 | 2160 | 160ARHE102M10A2Inquiry | |
25 (28.8) |
100 | 06X8 | 500 | 20 | 2800 | 1120 | 250ARHE101M06X8Inquiry |
| 180 | 08A2 | 900 | 16 | 4300 | 1720 | 250ARHE181M08A2Inquiry | |
| 220 | 08A2 | 1100 | 16 | 4300 | 1720 | 250ARHE221M08A2Inquiry | |
| 330 | 08A2 | 1650 | 16 | 4300 | 1720 | 250ARHE331M08A2Inquiry | |
| 470 | 08A2 | 2350 | 16 | 4300 | 1720 | 250ARHE471M08A2Inquiry | |
| 560 | 08A6 | 2800 | 14 | 4700 | 1880 | 250ARHE561M08A6Inquiry | |
| 560 | 10A2 | 2800 | 14 | 4700 | 1880 | 250ARHE561M10A2Inquiry | |
| 680 | 08A6 | 3400 | 14 | 4700 | 1880 | 250ARHE681M08A6Inquiry | |
| 680 | 10A2 | 3400 | 14 | 4700 | 1880 | 250ARHE681M10A2Inquiry | |
| 820 | 08B0 | 4100 | 14 | 5100 | 2040 | 250ARHE821M08B0Inquiry | |
| 1000 | 10A6 | 5000 | 14 | 5100 | 2040 | 250ARHE102M10A6Inquiry | |
| 1500 | 10B0 | 7500 | 14 | 5400 | 2160 | 250ARHE152M10B0Inquiry | |
35 (40.3) |
68 | 08X8 | 476 | 26 | 2800 | 1120 | 350ARHE680M08X8Inquiry |
| 100 | 08X8 | 700 | 26 | 2800 | 1120 | 350ARHE101M08X8Inquiry | |
| 150 | 08A2 | 1050 | 20 | 3600 | 1440 | 350ARHE151M08A2Inquiry | |
| 220 | 08A2 | 1540 | 20 | 3600 | 1440 | 350ARHE221M08A2Inquiry | |
| 330 | 08A6 | 2310 | 18 | 3900 | 1440 | 350ARHE331M08A6Inquiry | |
| 330 | 10A2 | 2310 | 18 | 4400 | 1760 | 350ARHE331M10A2Inquiry | |
| 470 | 08B0 | 3290 | 16 | 4600 | 1840 | 350ARHE471M08B0Inquiry | |
| 470 | 10A6 | 3290 | 16 | 4600 | 1840 | 350ARHE471M10A6Inquiry | |
| 560 | 10A6 | 3920 | 16 | 4600 | 1840 | 350ARHE561M10A6Inquiry | |
| 680 | 10B0 | 4760 | 16 | 5000 | 2000 | 350ARHE681M10B0Inquiry | |
50 (57.5) |
47 | 08A2 | 470 | 25 | 3000 | 1200 | 500ARHE470M08A2Inquiry |
| 68 | 08A2 | 680 | 25 | 3000 | 1200 | 500ARHE680M08A2Inquiry | |
| 150 | 08A6 | 1200 | 20 | 3600 | 1440 | 500ARHE151M08A6Inquiry | |
| 180 | 10A2 | 1800 | 25 | 3300 | 1320 | 500ARHE181M10A2Inquiry | |
| 220 | 10A2 | 2200 | 25 | 3300 | 1320 | 500ARHE221M10A2Inquiry | |
| 390 | 10B0 | 3900 | 18 | 4000 | 1600 | 500ARHE391M10B0Inquiry | |
63 (72.5) |
47 | 08A2 | 592 | 25 | 3000 | 1200 | 630ARHE470M08A2Inquiry |
| 56 | 08A2 | 705 | 25 | 3000 | 1200 | 630ARHE560M08A2Inquiry | |
| 56 | 10A2 | 705 | 25 | 3300 | 1320 | 630ARHE560M10A2Inquiry | |
| 100 | 10A2 | 1260 | 25 | 3300 | 1320 | 630ARHE101M10A2Inquiry | |
| 180 | 10A6 | 2268 | 22 | 3600 | 1440 | 630ARHE181M10A6Inquiry | |
| 220 | 10B0 | 2772 | 20 | 4000 | 1600 | 630ARHE221M10B0Inquiry |
| Category Temperature Range | -55 to 125℃ | Rated Voltage Range | 25 to 63Vdc |
| Rateh Capacitance Range | 100 to 680 (μF) | Capacitance Tolerance | ±20% (M) |
| Surge Voltage | Rated voltage x1.15(at 125°C) | Dissipation Factor | 0.12max.(at 20 °C 120Hz) |
| Leakage Current | Shall not exceed values shown in standard ratings. | ||
| Endurance | 125℃, 2000hrs, rated voltage applied | ||
| Appearance | No significant damage | ||
| Capacitance Change | ≦±20% of the initial value | ||
| DF(tanδ) | ≦200% of the initial specified value | ||
| ESR | ≦200% of the initial specified value | ||
| Leakage current | ≦The initial specified value | ||
| Damp Heat (Steady State) | 60℃, 90 to 95% RH, 1000hrs, voltage applied | ||
| Appearance | No significant damage | ||
| Capacitance Change | ≦±20% of the initial value | ||
| DF(tanδ) | ≦200% of the initial specified value | ||
| ESR | ≦200% of the initial specified value | ||
| Leakage current | ≦The initial specified value | ||
| Surge Voltage | 1,000 cycles and each one includes charge with surge voltage specified at 125 °C for 0.5min through a protective resistor (R=1kΩ) and discharge for 5.5min. | ||
| Appearance | No significant damage | ||
| Capacitance Change | ≦20% of the initial value | ||
| DF(tanδ) | ≦200% of the initial specified value | ||
| ESR | ≦200% of the initial specified value | ||
| Leakage current | ≦The initial specified value | ||
| Rated voltage (DC)(V) | Capacitance (μF) | Size Code | Leakage Current (μA) | ESR (mΩ) | Rated Ripple Current (mArms/ 105℃/100kHz) | Rated Ripple Current (mArms/ 125℃/100kHz) | Part No. |
| 25 (28.8) | 100 | 08X8 | 500 | 24 | 2,900 | 1,160 | 250ARHT101M08X8Inquiry |
| 220 | 08A2 | 1,100 | 18 | 4,250 | 1,700 | 250ARHT221M08A2Inquiry | |
| 330 | 08A2 | 1,650 | 18 | 4,250 | 1,700 | 250ARHT331M08A2Inquiry | |
| 470 | 08A2 | 2,350 | 18 | 4,250 | 1,700 | 250ARHT471M08A2Inquiry | |
| 560 | 10A2 | 2,800 | 16 | 4,700 | 1,880 | 250ARHT561M10A2Inquiry | |
| 680 | 10A2 | 3,400 | 16 | 4,700 | 1,880 | 250ARHT681M10A2Inquiry | |
| 35 (40.3) | 100 | 08A2 | 700 | 26 | 2,950 | 1,180 | 350ARHT101M08A2Inquiry |
| 150 | 08A2 | 1,050 | 26 | 2,950 | 1,180 | 350ARHT151M08A2Inquiry | |
| 180 | 08A2 | 1,260 | 26 | 2,950 | 1,180 | 350ARHT181M08A2Inquiry | |
| 220 | 08A2 | 1,540 | 26 | 2,950 | 1,180 | 350ARHT221M08A2Inquiry | |
| 330 | 10A2 | 2,310 | 24 | 3,400 | 1,360 | 350ARHT331M10A2Inquiry | |
| 390 | 10A2 | 2,730 | 24 | 3,400 | 1,360 | 350ARHT391M10A2Inquiry | |
| 50 (57.5) | 180 | 10A2 | 1,800 | 28 | 2,620 | 1,048 | 500ARHT181M10A2Inquiry |
| 220 | 10A2 | 2,200 | 28 | 2,620 | 1,048 | 500ARHT221M10A2Inquiry | |
| 63 (72.5) | 100 | 10A2 | 1,260 | 32 | 2,550 | 1,020 | 630ARHT101M10A2Inquiry |
| 150 | 10A2 | 1,890 | 28 | 2,550 | 1,020 | 630ARHT151M10A2Inquiry | |
| 180 | 10A2 | 2,268 | 28 | 2,550 | 1,020 | 630ARHT181M10A2Inquiry |
| Category Temperature Range | -55 to 105℃ | Rated Voltage Range | 25 to 80Vdc |
| Rated Capacitance Range | 22 to 1500 (μF) | Capacitance Tolerance | ±20% (M) |
| Surge Voltage | Rated voltage x1.15(at 105°C) | Dissipation Factor | 0.12max.(at 20°C 120Hz) |
| Leakage Current | Shall not exceed values shown in standard ratings. | ||
| Endurance | 105℃, 5000hrs, rated voltage applied | ||
| Appearance | No significant damage | ||
| Capacitance Change | ≦±20% of the initial value | ||
| DF(tanδ) | ≦150% of the initial specified value | ||
| ESR | ≦150% of the initial specified value | ||
| Leakage current | ≦The initial specified value | ||
| Damp Heat (Steady State) | 60℃, 90 to 95% RH, 1000hrs, voltage applied | ||
| Appearance | No significant damage | ||
| Capacitance Change | ≦±20% of the initial value | ||
| DF(tanδ) | ≦150% of the initial specified value | ||
| ESR | ≦150% of the initial specified value | ||
| Leakage current | ≦The initial specified value | ||
| Surge Voltage | 1,000 cycles and each one includes charge with surge voltage specified at 105°C for 0.5min through a protective resistor (R=1kΩ) and discharge for 5.5min. | ||
| Appearance | No significant damage | ||
| Capacitance Change | ≦±20% of the initial value | ||
| DF(tanδ) | ≦150% of the initial specified value | ||
| ESR | ≦150% of the initial specified value | ||
| Leakage current | ≦The initial specified value | ||
| Rated voltage (DC)(V) | Capacitance (μF) | Size Code | Leakage Current (μA) | ESR (mΩ) | Rated Ripple Current (mA)(rms) | Part No. |
| 25 (28.8) | 82 | 06X8 | 410 | 28 | 2,700 | 250ARHA820M06X8Inquiry |
| 100 | 08A2 | 500 | 22 | 3,600 | 250ARHA101M08A2Inquiry | |
| 220 | 08A2 | 1,100 | 16 | 4,650 | 250ARHA221M08A2Inquiry | |
| 330 | 08A2 | 1,650 | 16 | 4,650 | 250ARHA331M08A2Inquiry | |
| 470 | 08A2 | 2,350 | 16 | 4,650 | 250ARHA471M08A2Inquiry | |
| 560 | 10A2 | 2,800 | 14 | 5,100 | 250ARHA561M10A2Inquiry | |
| 680 | 08A6 | 3,400 | 14 | 5,000 | 250ARHA681M08A6Inquiry | |
| 680 | 10A2 | 3,400 | 14 | 5,100 | 250ARHA681M10A2Inquiry | |
| 820 | 08B0 | 4,100 | 13 | 5,100 | 250ARHA821M08B0Inquiry | |
| 1,000 | 10A6 | 5,000 | 13 | 5,200 | 250ARHA102M10A6Inquiry | |
| 1,500 | 10B0 | 7,500 | 13 | 5,300 | 250ARHA152M10B0Inquiry | |
| 35 (40.3) | 47 | 06X5 | 329 | 35 | 2,300 | 350ARHA470M06X5Inquiry |
| 68 | 06X8 | 476 | 25 | 2,600 | 350ARHA680M06X8Inquiry | |
| 100 | 06X8 | 700 | 35 | 2,350 | 350ARHA101M06X8Inquiry | |
| 100 | 08X8 | 700 | 23 | 2,800 | 350ARHA101M08X8Inquiry | |
| 220 | 08A2 | 1,540 | 25 | 2,890 | 350ARHA221M08A2Inquiry | |
| 330 | 10A2 | 2,310 | 24 | 3,400 | 350ARHA331M10A2Inquiry | |
| 470 | 08B0 | 3,290 | 20 | 4,400 | 350ARHA471M08B0Inquiry | |
| 470 | 10A6 | 3,290 | 25 | 4,000 | 350ARHA471M10A6Inquiry | |
| 560 | 10A6 | 3,920 | 23 | 4,200 | 350ARHA561M10A6Inquiry | |
| 680 | 10B0 | 4,760 | 20 | 4,800 | 350ARHA681M10B0Inquiry | |
| 50 (57.5) | 120 | 08A2 | 1,200 | 28 | 2,620 | 500ARHA121M08A2Inquiry |
| 180 | 10A2 | 1,800 | 28 | 3,100 | 500ARHA181M10A2Inquiry | |
| 220 | 10A2 | 2,200 | 28 | 3,100 | 500ARHA221M10A2Inquiry | |
| 390 | 10B0 | 3,900 | 23 | 3,800 | 500ARHA391M10B0Inquiry | |
| 63 (72.5) | 22 | 08X8 | 277 | 35 | 2,100 | 630ARHA220M08X8Inquiry |
| 47 | 08A2 | 592 | 30 | 2,500 | 630ARHA470M08A2Inquiry | |
| 68 | 10A2 | 857 | 25 | 2,500 | 630ARHA680M10A2Inquiry | |
| 100 | 10A2 | 1,260 | 30 | 2,700 | 630ARHA101M10A2Inquiry | |
| 180 | 10A2 | 2,268 | 30 | 2,700 | 630ARHA181M10A2Inquiry | |
| 80 (92) | 22 | 08X8 | 352 | 40 | 1,700 | 800ARHA220M08X8Inquiry |
| 47 | 10A2 | 752 | 32 | 2,100 | 800ARHA470M10A2Inquiry | |
| 82 | 10A2 | 1,312 | 32 | 2,200 | 800ARHA820M10A2Inquiry |
| Category Temperature Range | -55 to 105℃ | Rated Voltage Range | 2.5 to 16Vdc |
| Rated Capacitance Range | 10 to 1200 (μF) | Capacitance Tolerance | ±20% (M) |
| Surge Voltage | Rated voltage X 1.15 (at 105°C) | Dissipation Factor | 0.1 max. (at 20°C 120Hz) |
| Leakage Current | Shall not exceed values shown in standard ratings. (at 20°C after 2 mins.) | ||
| Endurance | 105℃, 5000hrs, rated voltage applied | ||
| Appearance | No significant damage | ||
| Capacitance Change | ≦±20% of the initial value | ||
| DF(tanδ) | ≦150% of the initial specified value | ||
| ESR | ≦150% of the initial specified value | ||
| Leakage current | ≦The initial specified value | ||
| Damp Heat (Steady State) | 60℃, 90 to 95% RH, 1000hrs, voltage applied | ||
| Appearance | No significant damage | ||
| Capacitance Change | ≦±20% of the initial value | ||
| DF(tanδ) | ≦150% of the initial specified value | ||
| ESR | ≦150% of the initial specified value | ||
| Leakage current | ≦The initial specified value | ||
| Surge Voltage | 1,000 cycles and each one includes charge with surge voltage specified at 105°C for 0.5min through a protective resistor (R=1kΩ) and discharge for 5.5min. | ||
| Appearance | No significant damage | ||
| Capacitance Change | ≦±20% of the initial value | ||
| DF(tanδ) | ≦150% of the initial specified value | ||
| ESR | ≦150% of the initial specified value | ||
| Leakage current | ≦The initial specified value | ||
| Rated voltage (DC)(V) | Capacitance (μF) | Size Code | Leakage Current (μA) | ESR (mΩ) | Rated Ripple Current (mA)(rms) | Part No. |
| 2.5 (2.9) | 390 | 05X8 | 500 | 7 | 4,180 | 2R5AR5K391M05X8CInquiry |
| 560 | 05X8 | 500 | 7 | 4,180 | 2R5AR5K561M05X8CInquiry | |
| 560 | 06X8 | 500 | 7 | 5,000 | 2R5AR5K561M06X8CInquiry | |
| 820 | 06X8 | 500 | 7 | 5,000 | 2R5AR5K821M06X8CInquiry | |
| 820 | 08X8 | 500 | 7 | 6,100 | 2R5AR5K821M08X8CInquiry | |
| 1000 | 08X8 | 500 | 7 | 6,100 | 2R5AR5K102M08X8CInquiry | |
| 3 (3.4) | 820 | 06X8 | 500 | 7 | 5,000 | 3R0AR5K821M06X8CInquiry |
| 4 (4.6) | 560 | 06X8 | 500 | 7 | 5,000 | 4R0AR5K561M06X8CInquiry |
| 6.3 (7.2) | 100 | 06X5 | 126 | 35 | 2,100 | 6R3AR5K101M06X5CInquiry |
| 470 | 06X8 | 592 | 8 | 4,700 | 6R3AR5K471M06X8CInquiry | |
| 560 | 06X8 | 705 | 8 | 4,700 | 6R3AR5K561M06X8CInquiry | |
| 560 | 08X8 | 705 | 8 | 5,700 | 6R3AR5K561M08X8CInquiry | |
| 820 | 06X8 | 1,033 | 8 | 4,700 | 6R3AR5K821M06X8CInquiry | |
| 820 | 08X8 | 1,033 | 8 | 5,700 | 6R3AR5K821M08X8CInquiry | |
| 10 (11.5) | 10 | 04X5 | 300 | 80 | 700 | 100AR5K100M04X5CInquiry |
| 16 (18.4) | 100 | 06X5 | 320 | 24 | 2,490 | 160AR5K101M06X5CInquiry |
| 100 | 06X8 | 320 | 25 | 2,820 | 160AR5K101M06X8CInquiry | |
| 270 | 06X8 | 864 | 10 | 5,000 | 160AR5K271M06X8CInquiry | |
| 270 | 08X8 | 864 | 10 | 5,000 | 160AR5K271M08X8CInquiry | |
| 270 | 08A2 | 864 | 10 | 5,230 | 160AR5K271M08A2CInquiry | |
| 470 | 08X8 | 1,505 | 10 | 5,000 | 160AR5K471M08X8CInquiry | |
| 470 | 08A2 | 1,505 | 10 | 5,230 | 160AR5K471M08A2CInquiry | |
| 470 | 10A2 | 1,505 | 10 | 6,100 | 160AR5K471M10A2CInquiry | |
| 680 | 08A2 | 2,176 | 10 | 5,230 | 160AR5K681M08A2CInquiry | |
| 820 | 08A2 | 2,624 | 12 | 4,950 | 160AR5K821M08A2CInquiry | |
| 1000 | 10A2 | 3,200 | 12 | 5,400 | 160AR5K102M10A2CInquiry | |
| 1200 | 10A2 | 3,840 | 12 | 5,400 | 160AR5K122M10A2CInquiry |
| Category Temperature Range | -55 to 105 ℃ | Rated Voltage Range | 6.3 to 35Vdc |
| Rated Capacitance Range | 100to 2200 (μF) | Capacitance Tolerance | ±20% (M) |
| Surge Voltage | Rated voltage X 1.15 (at 105 °C) | Dissipation Factor | 0.1 max. (at 20°C 120Hz) |
| Leakage Current | Shall not exceed values shown in standard ratings. (at 20°C after 2 mins.) | ||
| Endurance | 105℃, 3000hrs, rated voltage applied | ||
| Appearance | No significant damage | ||
| Capacitance Change | ≦±20% of the initial value | ||
| DF(tanδ) | ≦150% of the initial specified value | ||
| ESR | ≦150% of the initial specified value | ||
| Leakage current | ≦The initial specified value | ||
| Damp Heat (Steady State) | 60℃, 90 to 95% RH, 1000hrs, voltage applied | ||
| Appearance | No significant damage | ||
| Capacitance Change | ≦±20% of the initial value | ||
| DF(tanδ) | ≦150% of the initial specified value | ||
| ESR | ≦150% of the initial specified value | ||
| Leakage current | ≦The initial specified value | ||
| Surge Voltage | 1,000cycles and each one includes charge with surge voltage specified at 105 °C for 0.5min through a protective resistor (R=1kΩ) and discharge for 5.5min. | ||
| Appearance | No significant damage | ||
| Capacitance Change | ≦±20% of the initial value | ||
| DF(tanδ) | ≦150% of the initial specified value | ||
| ESR | ≦150% of the initial specified value | ||
| Leakage current | ≦The initial specified value | ||
| Rated voltage(DC)(V) | Capacitance(μF) | Size Code | Leakage Current(μA) | ESR(mΩ) | Rated Ripple Current(mA)(rms) | Part No. |
| 6.3 (7.2) | 220 | 06X5 | 277 | 15 | 3,160 | 6R3AREP221M06X5Inquiry |
| 270 | 05X7 | 340 | 12 | 3,500 | 6R3AREP271M05X7Inquiry | |
| 330 | 05X8 | 500 | 8 | 4,050 | 6R3AREP331M05X8Inquiry | |
| 330 | 06X5 | 500 | 17 | 3,390 | 6R3AREP331M06X5Inquiry | |
| 330 | 06X8 | 500 | 8 | 4,700 | 6R3AREP331M06X8Inquiry | |
| 390 | 05X8 | 500 | 11 | 3,700 | 6R3AREP331M06X8Inquiry | |
| 470 | 05X8 | 592 | 8 | 4,050 | 6R3AREP471M05X8Inquiry | |
| 470 | 06X8 | 592 | 8 | 4,700 | 6R3AREP471M06X8Inquiry | |
| 560 | 06X8 | 705 | 8 | 4,700 | 6R3AREP561M06X8Inquiry | |
| 680 | 06X8 | 857 | 8 | 4,700 | 6R3AREP681M06X8Inquiry | |
| 820 | 06X8 | 1,033 | 8 | 4,700 | 6R3AREP821M06X8Inquiry | |
| 1,000 | 06A0 | 1,260 | 8 | 4,700 | 6R3AREP102M06A0Inquiry | |
| 1,000 | 08X8 | 1,260 | 7 | 6,100 | 6R3AREP102M08X8Inquiry | |
| 1,200 | 08A2 | 1,512 | 7 | 6,100 | 6R3AREP122M08A2Inquiry | |
| 1,500 | 08A2 | 1,890 | 7 | 6,100 | 6R3AREP152M08A2Inquiry | |
| 1,500 | 1010 | 1,890 | 12 | 5,025 | 6R3AREP152M1010Inquiry | |
| 1,500 | 1012 | 1,890 | 7 | 6,640 | 6R3AREP152M1012Inquiry | |
| 6.8 (7.8) | 270 | 05X7 | 367 | 12 | 3,500 | 6R8AREP271M05X7Inquiry |
| 330 | 05X8 | 449 | 11 | 3,800 | 6R8AREP331M05X8Inquiry | |
| 470 | 05X8 | 639 | 8 | 3,200 | 6R8AREP471M05X8Inquiry | |
| 500 | 05X8 | 680 | 11 | 3,800 | 6R8AREP501M05X8Inquiry | |
| 820 | 06X8 | 1,115 | 8 | 5,500 | 6R8AREP821M06X8Inquiry | |
| 1,000 | 06A0 | 1,360 | 8 | 5,500 | 6R8AREP102M06A0Inquiry | |
| 7.5 (8.6) | 270 | 05X7 | 405 | 12 | 3,500 | 7R5AREP271M05X7Inquiry |
| 390 | 05X8 | 585 | 11 | 3,800 | 7R5AREP391M05X8Inquiry | |
| 500 | 05X8 | 750 | 12 | 3,500 | 7R5AREP501M05X8Inquiry | |
| 560 | 06X8 | 705 | 8 | 4,700 | 7R5AREP561M06X8Inquiry | |
| 680 | 06X8 | 1,020 | 12 | 4,780 | 7R5AREP681M06X8Inquiry | |
| 820 | 06A1 | 1,230 | 10 | 5,200 | 7R5AREP821M06A1Inquiry | |
| 10 (11.5) | 220 | 06X8 | 440 | 10 | 4,500 | 100AREP221M06X8Inquiry |
| 330 | 06X8 | 660 | 10 | 4,500 | 100AREP331M06X8Inquiry | |
| 470 | 06A0 | 940 | 10 | 4,700 | 100AREP471M06A0Inquiry | |
| 560 | 06A0 | 1,120 | 10 | 4,700 | 100AREP561M06A0Inquiry | |
| 680 | 08X8 | 1,360 | 12 | 4,700 | 100AREP681M08X8Inquiry | |
| 820 | 08A2 | 1,640 | 7 | 6,100 | 100AREP821M08A2Inquiry | |
| 1,000 | 08A2 | 2,000 | 8 | 6,100 | 100AREP102M08A2Inquiry | |
| 1,200 | 08A2 | 2,400 | 12 | 3,900 | 100AREP122M08A2Inquiry | |
| 12 (13.8) | 470 | 06A0 | 1,128 | 12 | 3,900 | 120AREP471M06A0Inquiry |
| 560 | 06A0 | 1,344 | 12 | 3,900 | 120AREP561M06A0Inquiry | |
| 16 (18.4) | 100 | 05X8 | 320 | 18 | 2,690 | 160AREP101M05X8Inquiry |
| 220 | 05X8 | 704 | 18 | 2,600 | 160AREP221M05X8Inquiry | |
| 220 | 06X8 | 704 | 15 | 3,200 | 160AREP221M06X8Inquiry | |
| 270 | 06X8 | 864 | 15 | 3,800 | 160AREP271M06X8Inquiry | |
| 330 | 06X8 | 1,056 | 20 | 2,800 | 160AREP331M06X8Inquiry | |
| 470 | 06A1 | 1,505 | 16 | 4,000 | 160AREP471M06A1Inquiry | |
| 470 | 08X8 | 1,505 | 16 | 4,000 | 160AREP471M08X8Inquiry | |
| 470 | 08A2 | 1,505 | 10 | 5,230 | 160AREP471M08A2Inquiry | |
| 470 | 1010 | 1,505 | 10 | 4,350 | 160AREP471M1010Inquiry | |
| 470 | 10A2 | 1,505 | 10 | 6,100 | 160AREP471M10A2Inquiry | |
| 560 | 06A1 | 1,792 | 20 | 3,500 | 160AREP561M06A1Inquiry | |
| 560 | 08A2 | 1,792 | 14 | 4,950 | 160AREP561M08A2Inquiry | |
| 680 | 08A2 | 2,176 | 10 | 5,230 | 160AREP681M08A2Inquiry | |
| 820 | 08A2 | 2,624 | 10 | 5,230 | 160AREP821M08A2Inquiry | |
| 1,000 | 08A6 | 3,200 | 10 | 6,100 | 160AREP102M08A6Inquiry | |
| 1,000 | 10A2 | 3,200 | 12 | 5,400 | 160AREP102M10A2Inquiry | |
| 1,200 | 10A2 | 3,840 | 10 | 6,100 | 160AREP122M10A2Inquiry | |
| 1,500 | 08A6 | 4,800 | 10 | 6,100 | 160AREP152M08A6Inquiry | |
| 2,200 | 10B0 | 7,040 | 8 | 8,100 | 160AREP222M10B0Inquiry | |
| 20 (23) | 330 | 06A0 | 1,320 | 16 | 3,460 | 200AREP331M06A0Inquiry |
| 390 | 0811 | 1,560 | 14 | 4,970 | 200AREP391M0811Inquiry | |
| 470 | 08A2 | 1,880 | 14 | 4,970 | 200AREP471M08A2Inquiry | |
| 680 | 08A6 | 2,720 | 16 | 4,650 | 200AREP681M08A6Inquiry | |
| 25 (28.8) | 330 | 10A2 | 1,650 | 16 | 5,100 | 250AREP331M10A2Inquiry |
| 470 | 08A2 | 2,350 | 16 | 4,650 | 250AREP471M08A2Inquiry | |
| 470 | 10A2 | 2,350 | 17 | 4,650 | 250AREP471M10A2Inquiry | |
| 560 | 08A6 | 2,800 | 14 | 5,000 | 250AREP561M08A6Inquiry | |
| 560 | 10A2 | 2,800 | 14 | 5,000 | 250AREP561M10A2Inquiry | |
| 680 | 08A6 | 3,400 | 14 | 5,000 | 250AREP681M08A6Inquiry | |
| 680 | 10A2 | 3,400 | 14 | 5,100 | 250AREP681M10A2Inquiry | |
| 820 | 08B0 | 4,100 | 13 | 5,100 | 250AREP821M08B0Inquiry | |
| 1,000 | 10A6 | 5,000 | 13 | 5,200 | 250AREP102M10A6Inquiry | |
| 1,500 | 10B0 | 7,500 | 13 | 5,300 | 250AREP152M10B0Inquiry | |
| 35 (40.3) | ||||||
| 100 | 06X8 | 700 | 35 | 2,350 | 350AREP101M06X8Inquiry | |
| 330 | 10A2 | 2,310 | 24 | 4,000 | 350AREP331M10A2Inquiry | |
| 470 | 08B0 | 3,290 | 20 | 4,400 | 350AREP471M08B0Inquiry | |
| 470 | 10A6 | 3,290 | 25 | 4,000 | 350AREP471M10A6Inquiry | |
| 560 | 10A6 | 3,920 | 23 | 4,200 | 350AREP561M10A6Inquiry | |
| 680 | 10B0 | 4,760 | 20 | 4,800 | 350AREP681M10B0Inquiry |
| Category Temperature Range | -55 to 105℃ | Rated Voltage Range | 2.5 to 16Vdc |
| Rated Capacitance Range | 270 to 2200 (μF) | Capacitance Tolerance | ±20% (M) |
| Surge Voltage | Rated voltage X 1.15 (at 105°C) | Dissipation Factor | 0.1 max. (at 20°C 120Hz) |
| Leakage Current | Shall not exceed values shown in standard ratings. (at 20°C after 2 mins.) | ||
| Endurance | 105℃, 2000hrs, rated voltage applied | ||
| Appearance | No significant damage | ||
| Capacitance Change | ≦±20% of the initial value | ||
| DF(tanδ) | ≦150% of the initial specified value | ||
| ESR | ≦150% of the initial specified value | ||
| Leakage current | ≦The initial specified value | ||
| Damp Heat (Steady State) | 60℃, 90 to 95% RH, 1000hrs, voltage applied | ||
| Appearance | No significant damage | ||
| Capacitance Change | ≦±20% of the initial value | ||
| DF(tanδ) | ≦150% of the initial specified value | ||
| ESR | ≦150% of the initial specified value | ||
| Leakage current | ≦The initial specified value | ||
| Surge Voltage | 1,000 cycles and each one includes charge with surge voltage specified at 105°C for 0.5min through a protective resistor (R=1kΩ) and discharge for 5.5min. | ||
| Appearance | No significant damage | ||
| Capacitance Change | ≦±20% of the initial value | ||
| DF(tanδ) | |||
| ESR | ≦150% of the initial specified value | ||
| Leakage current | ≦The initial specified value | ||
| Rated voltage(DC)(V) | Capacitance(μF) | Size Code | Leakage Current(μA) | ESR(mΩ) | Rated Ripple Current(mA)(rms) | Part No. |
| 2.5 (2.9) | 560 | 06X8 | 500 | 7 | 5,000 | 2R5AREC561M06X8Inquiry |
| 560 | 08X8 | 500 | 7 | 6,100 | 2R5AREC561M08X8Inquiry | |
| 820 | 06X8 | 500 | 7 | 5,000 | 2R5AREC821M06X8Inquiry | |
| 820 | 08X8 | 500 | 7 | 6,100 | 2R5AREC821M08X8Inquiry | |
| 1000 | 08X8 | 500 | 7 | 6,100 | 2R5AREC102M08X8Inquiry | |
| 1200 | 08X8 | 600 | 7 | 6,100 | 2R5AREC122M08X8Inquiry | |
| 1500 | 08A2 | 750 | 7 | 6,100 | 2R5AREC152M08A2Inquiry | |
| 1500 | 10A2 | 750 | 7 | 6,640 | 2R5AREC152M10A2Inquiry | |
| 2200 | 10A2 | 1,100 | 7 | 6,640 | 2R5AREC222M10A2Inquiry | |
| 4 (4.6) | 560 | 08X8 | 500 | 7 | 6,100 | 4R0AREC561M08X8Inquiry |
| 1200 | 08X8 | 960 | 7 | 6,100 | 4R0AREC122M08X8Inquiry | |
| 6.3 (7.2) | 470 | 06X8 | 592 | 8 | 4,700 | 6R3AREC471M06X8Inquiry |
| 470 | 08X8 | 592 | 8 | 5,700 | 6R3AREC471M08X8Inquiry | |
| 560 | 06X8 | 705 | 8 | 4,700 | 6R3AREC561M06X8Inquiry | |
| 560 | 08X8 | 705 | 8 | 5,700 | 6R3AREC561M08X8Inquiry | |
| 820 | 06X8 | 1,033 | 8 | 4,700 | 6R3AREC821M06X8Inquiry | |
| 820 | 08X8 | 1,033 | 8 | 5,700 | 6R3AREC821M08X8Inquiry | |
| 1000 | 10A2 | 1,260 | 7 | 6,640 | 6R3AREC102M10A2Inquiry | |
| 1500 | 10A2 | 1,890 | 7 | 6,640 | 6R3AREC152M10A2Inquiry | |
| 16 (18.4) | 270 | 08X8 | 864 | 10 | 5,000 | 160AREC271M08X8Inquiry |
| 270 | 08A2 | 864 | 10 | 5,230 | 160AREC271M08A2Inquiry | |
| 330 | 08X8 | 1,056 | 10 | 5,000 | 160AREC331M08X8Inquiry | |
| 470 | 08A2 | 1,505 | 10 | 5,230 | 160AREC471M08A2Inquiry | |
| 680 | 10A2 | 2,176 | 10 | 6,100 | 160AREC681M10A2Inquiry | |
| 820 | 10A2 | 2,624 | 10 | 6,100 | 160AREC821M10A2Inquiry |
| Category Temperature Range | -55 to 105℃ | Rated Voltage Range | 2.5 to 16Vdc |
| Rateh Capacitance Range | 100to 1000 (μF) | Capacitance Tolerance | ±20% (M) |
| Surge Voltage | Rated voltage X 1.15 (at 105°C) | Dissipation Factor | 0.1 max. (at 20°C 120Hz) |
| Leakage Current | Shall not exceed values shown in standard ratings. (at 20°C after 2 mins.) | ||
| Enhurance | 105℃, 2000hrs, rated voltage applied | ||
| Appearance | No significant damage | ||
| Capacitance Change | ≦ ±20% of the initial value | ||
| DF(tanδ) | ≦ 150% of the initial specified value | ||
| ESR | ≦ 150% of the initial specified value | ||
| Leakage current | ≦ The initial specified value | ||
| hamp Heat (Steady State) | 60℃, 90 to 95% RH, 1000hrs, voltage applied | ||
| Appearance | No significant damage | ||
| Capacitance Change | ≦ ±20% of the initial value | ||
| DF(tanδ) | ≦ 150% of the initial specified value | ||
| ESR | ≦ 150% of the initial specified value | ||
| Leakage current | ≦ The initial specified value | ||
| Surge Voltage | 1,000 cycles and each one includes charge with surge voltage
specified at 105°C for 0.5min through a protective resistor (R=1kΩ) and discharge for 5.5min. |
||
| Appearance | No significant damage | ||
| Capacitance Change | ≦ ±20% of the initial value | ||
| DF(tanδ) | ≦ 150% of the initial specified value | ||
| ESR | ≦ 150% of the initial specified value | ||
| Leakage current | ≦ The initial specified value | ||
| Rated voltage (DC)(V) | Capacitance (μF) | Size Code | Leakage Current (μA) | ESR (mΩ) | Rated Ripple Current (mA)(rms) | Part No. |
| 2.5 (2.9) |
560 | 06X5 | 280 | 10 | 3,900 | 2R5AREA561M06X5Inquiry |
| 820 | 08X8 | 410 | 10 | 5,230 | 2R5AREA821M08X8Inquiry | |
| 6.3 (7.2) |
220 | 06X5 | 277 | 15 | 3,160 | 6R3AREA221M06X5Inquiry |
| 330 | 06X5 | 416 | 17 | 3,390 | 6R3AREA331M06X5Inquiry | |
| 470 | 08X8 | 592 | 15 | 4,210 | 6R3AREA471M08X8Inquiry | |
| 820 | 08A2 | 1,033 | 12 | 4,710 | 6R3AREA821M08A2Inquiry | |
| 16 (18.4) |
100 | 06X5 | 320 | 24 | 2,490 | 160AREA101M06X5Inquiry |
| 100 | 06X8 | 320 | 25 | 2,820 | 160AREA101M06X8Inquiry | |
| 1,000 | 10A2 | 3,200 | 12 | 5,400 | 160AREA102M10A2Inquiry |
