The CINCON ECLB75W-24S12 is an industrial-grade, isolated 75 W DC-DC converter module designed for high-reliability applications. Key specifications are as follows:

　　Main Specifications:

　　- Input Voltage: 9–36 VDC (nominal 24 VDC)

　　- Output Voltage: 12 VDC

　　- Output Current: Up to 6.25 A

　　- Output Power: 75 W

　　- Isolation Voltage: 2250 VDC (input to output)

　　- Efficiency: Up to approximately 92%

　　- Switching Frequency: 270 kHz (typical)

　　Protection Features:

　　- Input under-voltage lockout (UVLO)

　　- Output overcurrent and short-circuit protection (hiccup mode)

　　- Remote on/off control (enabled by high-level signal or open circuit)

　　- Output voltage trim adjustment: ±10% via external resistor

　　Performance Parameters:

　　- Output ripple and noise: ≤150 mVpp (measured with 20 MHz bandwidth, 1 µF MLCC load capacitance)

　　Operating Conditions:

　　- Operating temperature range: –40 °C to +85 °C

　　(derating required above +54 °C; natural convection cooling recommended; heatsink or forced air cooling advised at elevated temperatures)

　　Mechanical Characteristics:

　　- Dimensions: 52 mm × 30.5 mm × 10.2 mm (2.05" × 1.20" × 0.40")

　　- Mounting method: Screw fixation with 2" × 1" industrial standard pin layout

　　- Weight: Approximately 39 g

　　Typical Applications:

　　Suitable for industrial automation, telecommunications, instrumentation, and other systems requiring isolated conversion from a 24 V bus to a 12 V supply.

Related model：

　CINCON is a TAIWAN brand, we are the distributors, If you want to know more about CINCON DC-DC power modules, you can contact CORE.